1-800-465-6246 | Contact Us | Cross Reference
  • Flow Capacity 4 GPM
  • Industrial Quality Motor/Pump
  • Strainer on Pump Inlet
  • Easy to Change Spin-on-Filter Elements
  • (no tools needed)
Motor/Pump: Single Phase Motor 1/2 hp 110/60Hz
Power Cord: 6' Length 3/4" Vardex Hose
Wand: 18" Length, adjust to 36"
Fluids: Petroleum Based (500 SUS Maximum)
Weight: 27LBS

Download PDF
Hand held filter cart

Cart Unit

Filter Cart Unit
  • 11 GPM Flow Capacity
  • Two Filters, for Longer Filter Life
  • Industrial Quality Gear Pump
  • Heavy Duty cart/Panel, with Drip Pan
  • Pump Safety Relief Valve
  • "Y" Strainer on Pump Inlet
  • Easy to Change Spin-on-Filter Element (no tools needed)
Pump:11 GPM Industrial Gear Type Pump
Electric Motor:3/4 HP @1725 RPM, 1.15 S.F., TEFC
Electrical Service Required: 115 Volts, 10 amps, Single Phase, 60 Cycles
Power Cord: 12' Long industrial cord (14-3) with standard 3-prong Plug
On/Off Switch: Industrial Toggle-Operated Motor Starter Mounted in a NEMA-I Housing with Replaceable Motor Overloads
Pump Relief Setting: 60 PSIG Fixed
Filter By-Pass Valve Settings: Set @ 25 PSID on Both Primary & Secondary Stage
Filter Cart Hoses: 12' Long, 3/4" I.D., Steel Wire Reinforced PVC Hoses with 3' Metal Wand on Both Suction & Discharge Lines
Fluids: Petroleum Based (500 SUS Maximum)
Weight: 145 LBS. (approximate shipping weight)

Download PDF

SAVE On Maintenance Cost and Down-time By Reducing Waste Oil Disposal, as State & Federal Regulations continue To Tighten By Filtering While Machines Are Running

All filter carts are provided with elements (at no charge) with your initial purchase in any of the following media and micron combinations:

Cellulose – 3, 10 & 25 micron
Microglass – 1, 3, 6, 10, 25 micron
Wire Mesh – 60 & 125 micron

Water Removal with any of the above micron ratings for Cellulose or Microglass media.

One of the largest hydraulic cross references available!

Start searching!